What is the VW Golf Mk2 Standard Suspension Height?

What is the VW Golf Mk2 Standard Suspension Height?

When I bought my Golf it had been substantially lowered. The invoices that came with the car suggested it had been dropped by 20mm with Eibach Pro lowering springs but the look of the car suggested something much more than this. One of the MOT advisories was that the rear springs were excessively corroded so I decided that replacing them with new would be sensible option.

Having removed all the shock absorbers and checked the condition of the springs they certainly didn't appear to be the Eibach version and looked much more compressed.

Once all the springs had been replaced with brand new  Eibach Pro lowering springs the car was quite a bit higher than before and from measurements I'd taken had raised the ride height by around 20mm. There is still a bit more to come as some of the components required replacement but had to be ordered to fit later.

What is the VW Golf Mk2 Standard Suspension Height?

The measurements for the ride height of the car after fitting Eibach springs was as follows (measured from centre cap to top of wheel arch):

Driver's side - Front 315mm
Passenger Side - Front 315mm

Driver's side - Rear 295mm
Passenger Side - Rear 300mm

There is an issue with the passenger side rear wheel so I will be replacing the stub axle shortly. It will be interesting to see how much difference that makes to the height.

Measuring slightly differently from the ground to the top of wheel arch the VW Golf GTI 16V suspension height was:

Driver's side - Front 580 mm
Passenger Side - Front 575 mm

Driver's side - Rear 560 mm
Passenger Side - Rear 590mm

The car currently has 195/45/15 tyres on the front and 195/50/15 on the back which may also explain some of the difference between front and rear suspension height.